New designed ABS case, suitable for Raspberry Pi 3 Model B and Raspberry Pi 3. It is easy to install the case with screen and Raspberry Pi. You can use the case with only Raspberry Pi, and you can also use the case Together with with Raspberry Pi and the 3.5 inch screen, but you need remove the top piece when you use for 3.5 inch screen. About the case 1. Material: ABS, it is well protective. 2. New design for Raspberry Pi, you can also use 3.5 inch screen and Raspberry Pi together with the case. 3. The case is not completely closed, there are function hole on the top, such as GPIO, camera , cooling fan. There are many gaps at the bottom of the case, it helps to reduce the blocking the WiFi signal and better heat dissipation. You can hang the case on the wall with the gaps. 4. On The side of the case, you can clearly see the indicator light and you can easily insert the SD Card. Note: When y Ou use the screen with the case, please remove the top piece, the screen and cooling fan can't be used at the same time. Not raspberry pi and fan.
ABS Plastic Material – Preferred if you will use WiFi or Bluetooth, black textured so it doesn't leave fingerprints. (NOT Include Screen and Raspberry Pi)
2-in-1 Design – Perfectly protect the Raspberry Pi 3/3B+ or 3.5 inch touch screen (Open the Moonroof).
Easy install – Stable without screws, overall aesthetic is very pleasing.
Not completely closed – Accurate plugs on the case are available to connect Pi’s GPIO, HDMI, USB, SD, Audio, Camera, Power Supply etc. ports.
Many gaps at the bottom of the case to help reduce blocking of the WiFi signal and better heat dissipation. You can also hang the case on the wall.