Voltage: DC 12V
Power source: car cigarette lighter
Cable length: 5m / 16ft
Size: 36 * 10 * 9cm/ 14'' * 3.9'' * 3.5''
1. Insert the cigarette lighter into car cigarette lighter socket.
2. The switch on/off button is on the top of the vacuum cleaner, turn on the switch make vacuum working.
3. Please use the different Nozzle in different corner. The power cable is 5M / 16ft, it will help to clear each place, including Car trunk.
4. In front of the vacuum cleaner with a filter housing cover fixed switch, press the button to take off front cover to clean the filter.
5. This car vacuum work both in dry and wet, when suck water ,please take off front cover to drain away the water.
1* Car vacuum cleaner
1* Crevice Nozzle
1* Brush nozzle
1* EVA hose
1* user manual
1* portable bag
1* microfiber towel
Entrance aligned garbage when used, debris must not exceed the size of inlet diameter.
Not recommended to clean opp bags, because the inlet is blocked easily by opp bags.
Different occasions to replace the different nozzles.
Open the dustbin to drain in time when water sucking.
Not use or feel the suction is not enough, please feel free to contact us, we'll provide very detailed video instructions. Or you could try another 12v power to try, pls ensure the power could run 120W.
1. When the vacuum cleaner does not work, please check the plug is in good connection, and check if the fuse plug is off.
2. The vacuum cleaner only work with DC 12V.
3. Continuous work cannot be more than 20 minutes. Slight fever phenomenon, please do not care, this is normal.
4. I would recommend emptying your vacuum at about half way full, otherwise it will affect the suction well.
5. HEPA filters can be cleaned and reused.