Floureon 2 Gang 1 way wireless remote control light switch with blue LED light is a perfect light switch improving your contemporary and stylish house. With 600w maximum load power, it matches many types of lamps, such as incandescent lamps, energy saving lamps, fluorescent lamps, ceiling lamps, LED lamps and other common lamps. The RF remote controller, with high quality tempered glass surface and perfect touch sensitive function, it is convenient to install in a wall or place anywhere in your house. The receiver can be paired with more than 2 remote controllers (4 controllers at most) at the same time, which enables to improve the dual control, mutual control or multiple control light switch. Advanced with power-off memory function, once the receiver paired with the remote controller, you don’t need to pair it again under any circumstances (like power off, disassembly or reinstall ) unless you manually clear the pair codes.
-Easy and Quick installation,
-Good replacement of traditional wired wall switch
-Remote control wireless light switch
-(RF) 433.92MHz Radio Frequency Enabled
-Remote control distance: ≤30m
-Power-off memory function of the receiver
-Touch control switch with blue LED light
-High quality tempered glass panel Design
-One receiver can connected with solid wire or strand wire
-For wide applications: incandescent lamps, energy saving
lamps, fluorescent lamps, ceiling lamps, LED lamps, etc..
-CE and RoHS Certified
Rated voltage: 100V-240V AC
Operating frequency: 50/60Hz
Performance Tolerance: 85-275V ( suitable for all countries worldwide voltage standard )
Standby power consumption: 0.2W
Load power: 0-600W (Electronic load/inductive load, single loop control≤100W)
Frequency band: 433.92 MHz
Life time: 100,000 times
Size: 65x40x23mm (2.56×1.56×0.91in)
Weight: 51g (each receiver)
Remote control specifications:
Battery: 1x 23A/12v battery
Standby power consumption: 1 gang≤0.04mW, 2 gang≤0.08mW, 3 gang≤0.12mW
Remote control distance: ≤30 meters
Frequency band: 433.92 MHz
Size: 86 x86x16mm (3.39×3.39×0.63in)
Condition of use:
Working temperature:0℃ -45℃
Relative Humidity: 10% -93% (non-condensing)
1x Floureon 2 Gang 1 Way Touch Switch
1x 23A/12v Battery
2x 3M Adhesive Tapes
1x Manual Instruction
Cautions before Usage:
-Please read our operating instruction manual carefully before using our products.
-1 Gang only can control one receiver. 2 Gang only can control two receivers. 3 Gang only can control one receivers.
-The load of the products must be in the load range of 0-600W, otherwise damage might be caused to the circuit.
-Turn off the power before the installation and removal of the switch and receiver.
-Our switch is only suitable for indoor use, not for outdoors use.
Get these Essentials for Your Product